Insta360 X3 Sticky Lens Guards

. Material: Polymethyl methacrylate (PMMA)
. Weight: 1.5g
. Dimensions (DxH): 34.80 x 10.95mm

What's in the Box?
. 2x Sticky lens guard
. 6x Double-sided adhesive (the lens guards come with double sided adhesives already attached)
. 1x Triangle Prying Tool
. 1x Lens Cloth

User Notes
1. Before use, make sure that the camera's lens is clean and dry. Always install the lens guard in a clean and dry environment. Check carefully for dust and other particles as these may affect shooting results.
2. Prior to installing, ensure that the thin guard is installed on the side with the camera screen, with the thick guard used for the opposite side.
3. If you remove the lens guard from X3, apply new double sided adhesive before re-installing the lens guard.
4. The sticky lens guard is only splash-proof and is not designed for underwater shooting. If you are planning to use the X3 underwater, remove the sticky lens guard and use the X3 Dive Case for best results.
5. To remove the lens guard, please use included Triangle Prying tool. Take care not to scratch the camera lenses as you remove the lens guard.
6. To change the double sided adhesives, first remove the used double sided adhesives and be sure that the inside of the lens guard is clean and has no residue. Repeat the installation process, ensuring the notch on the rim of the lens guard is correctly aligned.