Proper installation of the Mips® Air Replacement System is essential for the helmet to work as intended.
The Mips® Air System is held in place by a number of fixations that are each connected to the helmet with hook and loop Velcro™.
When re-installing the Mips ® Air system, make sure that every Velcro is positioned correctly by aligning one at a time.
WARNING: The Mips® Air System is designed and tested for use with the intended Mips® Air equipped helmet model and size only. The Mips® Air system are not interchangeable between other helmet models or sizes. Installation of Mips® Air system on an incompatible helmet or size may result in the helmet not performing as intended.
CAUTION: Pulling too hard may remove the inner Velcro tabs from the helmet and / or causing the fixation to break. Pads may be cleaned by carefully rinsing in lukewarm water and dried in room temperature.