Shimano SM-BH90-SBM 1000mm Disc Brake Hose (XTR, XT, Deore, SLX)

Make sure your brakes are good to go with this Shimano SM-BH90-SBM Disc Brake Hose kit to complete your build. The hose is 1000mm in length and has a Banjo Bolt on one end. The other end is straight cut. It comes with all of the necessary O-rings / Insert / Olive and Cable Clamping Blocks required for installation. All you need are the tools. Wrapped with anti-corrosion treatment and suitable for either front or rear brakes, this hose is compatible with magnesium calipers/levers like the XTR M9000 / M9020.

Box Contents
1 x 1000mm length hose with banjo bolt
2 x Clamping blocks
1 x Olive
3 x O-rings
1 x Insert
plus misc. mounting hardware

Do Not Reuse Parts
Do not reuse the Olive piece or the Connector Insert when reinstalling. A damaged or reused olive, or connector insert, may not provide a secure brake hose connection, possibly causing the brake hose to disconnect from the calipers or brake lever. If the brake hose becomes disconnected, there is danger that the brakes may suddenly stop working.

Cutting The Brake Hose
Cut the brake hose so that the cut end is perpendicular to the length of the hose. If the brake hose is cut at an angle, fluid leaks may result.