skingrowsback Lunchbox Handlebar Bag

The Lunchbox Handlebar Bag sits neatly on almost any flat or drop bar.

The two one-wrap straps allow the rider to mount it quickly to their bars and the shock cord toggle wraps around the head tube to reduce movement whilst riding. There are two bar mount options should you need to shuffle one of the straps across to accommodate a bell or computer.

The main compartment has a 3.32 litre cylinder shaped volume suited for jackets, cameras and snacks. This is via the YKK AquaGuard® zip which help shelter the contents from the elements. The main wall has been reinforced to allow the rider to access the bag one handed while riding, very useful for descending. This pocket is finished off with a crescent zipper pull making it easy to grab on rough ground. A solid main wall offers greater performance and reduces movement.

The webbing across the front panel allows the rider to mount a light on the front of the bag. The shock cord assembly is handy for a pump or similar items, use your imagination on this one.

There are two mesh pockets on the side for storing your litter on the move. They are both retained with an adjustable shock cord toggle.

Includes 1 pair of 15mm BLOC Handlebar Bag Spacers.

This Lunchbox is Manufactured in Melbourne Australia

Specs

• Weather Resistant 1000D Nylon shell.

• 0.6mm Polypropylene Main Wall.

• Light-weight 70D Ripstop Liner Black

• YKK® AquaGuard Zip.

• Reinforced Zip line.

• Extended Crescent Zipper Pull.

• HD Mesh side pockets for litter.

• 0.6mm Polypropylene side discs gives shape.

• Front Panel Shock Cord Assembly.

• Low profile One-Wrap Handlebar Mounts.

• Weight: 280g.

• Dimensions: 270mm wide x 130mm diameter.

• Volume: 3.32 Litres.

Care Instructions

If you can't get your skingrowsback product looking good with a simple hose down, it's recommended to hand wash with a mild detergent if required, dry in the shade only.

Do not machine wash, machine dry, or iron. Avoid pressure washing and drying in direct sun light.

Here are some useful suggestions for maintaining your skingrowsback product.

Washing.

When it comes to washing there are two ways you can approach this. Primarily for skingrowsback on bike products the most effective way is to use a hose to remove the bulk of the dirt and mud. Try to avoid using a pressure washer as this can do more harm than good. Different colours will have different results, the brighter the colour the more difficult it will be to keep clean for obvious reasons.

If the product you are washing has a stiff component to it please DO NOT wash it in the washing machine, this will cause the structure to be compromised.

Understanding the materials skingrowsback use for products will help you care for them in an optimal way. Almost all products use materials that have a DWR coating (Durable Water Repellent) on the outer layer. Over time this will wear off with factors like abrasion, fibre stress, prolonged UV exposure and detergents. 

Zips

Using zips is pretty self explanatory, you pull it one way to open and the opposite way to close.

You can avoid stress on the teeth of the zip if you hold the product together when zipping it up. Pushing any obstructions away from the zip slider as you close it can avoid a jam, lightweight materials like jackets are notorious for this. Removing dirt, mud and particularly sand from the surface of the zip can reduce the risk of damage when opening and closing. All our on bike products use a YKK PU coated zip this offers a degree of water repellency, it's also easy to wipe down before use.

Zip lube is another great way to prolong the life of your zip. Yes, zip lube. Apply a small amount to the teeth of the zip occasionally for smoother running zips.

Spray Before You Play.

Before you use your product skingrowsback recommends using a water shield spray, this not only repels water but will reduce the amount of dirt that sticks to the surface. Follow the instructions on the container for the best results.