Wheels MFG BBRight-Shim Adapter for Shimano 24mm Spindle Cranks

A new solution for adapting Shimano cranks to BBRight standard frames this kit includes 2 adapter shims and an assortment of left and right side spacers. Simply tap the adapters into the bearing in the BB shell, then install the cranks using the included spacers to adjust the chain line, or to take up any side-to-side movement in the crank. The kit comes with eight 0.7mm shims for fine-tuning the chain line and will adapts Shimano 24mm spindle cranks to most BBRight-standard frames. Made for Wheels MFG from machined engineering-grade Delrin this adapter is compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, and R5 VWD. It is NOT compatible with with R5ca direct-fit BB or the FSA BBRight bottom bracket. It's a truly elegant way to adapt Shimano Hollowtech II cranks to Cervelo BBright bottom brackets. Spacer/shim set installs between the crank and the bottom bracket.

Features
. Machined engineering-grade Delrin
. Includes eight 0.7mm shims for fine-tuning chain line
. Adapts Shimano 24mm spindle cranks to most BBRight-standard frames
. Will suit 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, and R5 VWD
. Not compatible with R5CA direct-fit BB
. Not compatible with FSA BBRight bottom bracket

Adapter Installation
. If not already installed, press Cervelo's PF30 bottom bracket cups into frame
. Identify left and right side adapters
. Start inserting adapters into bottom bracket bearings by hand
. Seat adapters using a rubber mallet
. Install crank spindle through the adapters and tighten per manufacturer's instructions
. Take up any play in your cranks with our Crank Spindle Spacers. Place the spacers as shown below