Crank Brothers XD Driver Body/End Cap Kit for SRAM XX1 Cassette
$179.99
Compatible with 2011 and newer wheels using a Crank Brothers 12mm thru-axle hub this XD Driver Freehub Body & End Cap Kit replaces the body on any current Cobalt or Iodine wheels with a SRAM XD compatible body. If you have recent edition Crank Brothers Cobalt or Iodine wheels and want to make the transition to SRAM's revolutionary 1x11 system, then the Crank Brothers XD Driver Body is what you need to convert the rear hub to the 11-speed XD driver body standard. All you need to do is swap the existing freehub with the XD Driver and you'll be all set to install the 11-speed 10-42 cassette.
Box Contents:
. 1 x 142x12mm Thru-axle end cap set
. 1 x 135x10mm end cap set (QR not included)
Box Contents:
. 1 x 142x12mm Thru-axle end cap set
. 1 x 135x10mm end cap set (QR not included)
. Converts Crank Brothers 12mm thru-axle hub to SRAM XD compatible body
. XD Driver freehub for SRAM XX1 cassettes
. Manufacturer's Warranty: 2 years
. Weight: 137g
. All models require SRAM XD compatible 11-speed cassette
Compatible with:
. 3rd generation Cobalt or Iodine wheels
. 2nd generation Cobalt or Iodine wheels (14212mm rear axle spacing only)
Not compatible with:
. 1st generation wheels
. Hubs that cannot be converted to thru-axle
Suitable 2014 Models:
. Cobalt or Iodine 2 + 3 level wheels
. Cobalt 11 level wheels
Suitable 2011 Models:
. Cobalt or Iodine 2 + 3 level wheels (with 14212mm rear hub)
. Cobalt 11 level wheels (with 14212mm rear hub)
. Iodine 3 level 29er wheels
Related Products
