Sold out
Effetto Mariposa G2 2-16D Deluxe Torque Wrench
$319.99
$299.99
(You save
$20.00
)
The home-mechanic's dream tool, the original Giustaforza now comes to you with an even smaller head, to operate in super-tight spaces. The Effetto Mariposa DELUXE Torque Wrench is supplied in a practical wrap package and comes complete with cycle-specific bits. It's a state-of-the art tool, built to last and, it must be emphasised, features a light, aluminium body weighing under 180g. The tool is hard-anodised with laser-etched inscriptions, bears a click-type function to make the wrench extremely shock-tolerant and being completely free of batteries or electronic assistance operates with an old-fashioned, unbeatable reliability. Each wrench is hand checked and also features a unique serial number.
Features:
. Rounded head for easier access to hard-to-reach bolts
. Extremely user-friendly with laser-etched inscriptions
. Graduated scale with 0.5 Nm increments
. Loud 'CLICK' and a 3 free-movement tells when the torque has been reached
. 13 bits included
. No batteries
. Extremely shock tolerant
. Torque Range: 2-16 Nm
. Body: Hard Anodised Aluminium
. Adjustment knob: Steel
. Bit-holder: Steel
. Bits: S2 special steel with very high (62 Hrc) surface hardness to ensure maximum durability
. Professional precision: +/-4% guaranteed for 5,000 clicks (torque applications)
. Unique serial number
. Made in Italy
. Wrench weight: less than 180 g
. Note: Always return the torque wrench setting back to 2 Nm when not in use to ensure long-term accuracy
Features:
. Rounded head for easier access to hard-to-reach bolts
. Extremely user-friendly with laser-etched inscriptions
. Graduated scale with 0.5 Nm increments
. Loud 'CLICK' and a 3 free-movement tells when the torque has been reached
. 13 bits included
. No batteries
. Extremely shock tolerant
. Torque Range: 2-16 Nm
. Body: Hard Anodised Aluminium
. Adjustment knob: Steel
. Bit-holder: Steel
. Bits: S2 special steel with very high (62 Hrc) surface hardness to ensure maximum durability
. Professional precision: +/-4% guaranteed for 5,000 clicks (torque applications)
. Unique serial number
. Made in Italy
. Wrench weight: less than 180 g
. Note: Always return the torque wrench setting back to 2 Nm when not in use to ensure long-term accuracy
Capacity from 2 up to 16 Nm:
. This is the best torque range for precision bicycle applications and 'sensitive' components. When in use you should always refer to the torque values specified on technical documents or printed on the parts themselves
Easy to use: . Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other) . Insert the appropriate bit (depending on the bolt you need to tighten) . Using the tool, a loud 'CLICK' and a 3 free-movement tells when the torque has been reached . Always return the wrench to minimum torque value setting after use
Minimal fixed head: . Giustaforza's simple, 'non-ratcheting' head has been chosen on purpose on this version to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage
Lightweight: . The light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque
A state-of-the art tool, built to last: . Functional, linear in design and precise in any detail: it shouldn't be a surprise to know that Giustaforza II 2-16 DELUXE has been conceived and produced in Italy. The tool is hard-anodised with laser-etched inscriptions, and it's built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as an individualised masterpiece
Calibration service: . The +-4% tolerance is guaranteed for 5000 cycles (5000 'clicks'), then the wrench should be re-calibrated. Calibration is a service Effetto Mariposa offer in their laboratories (please contact Pushys Online or Effetto Mariposa direct for more details). A certificate of calibration is returned with each wrench serviced. Once the calibration is complete the tolerance of +-4% over nominal value will once again extend for the duration of 5000 cycles.
The DELUXE version is equipped with a bicycle-specific bit set: . Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 and T25) plus several other Torx and hex bits in standard length (25 mm). These should cover all of the newest Shimano, SRAM and Campagnolo high-end groupsets, plus a range of reversed-bolt stems . All bits are manufactured from S2 special steel with very high (62 Hrc) surface hardness to ensure maximum durability
Detail of bits: . 10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1) . 3x100mm (HEX4, HEX5, T25) . 1x100mm (extension
Easy to use: . Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other) . Insert the appropriate bit (depending on the bolt you need to tighten) . Using the tool, a loud 'CLICK' and a 3 free-movement tells when the torque has been reached . Always return the wrench to minimum torque value setting after use
Minimal fixed head: . Giustaforza's simple, 'non-ratcheting' head has been chosen on purpose on this version to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage
Lightweight: . The light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque
A state-of-the art tool, built to last: . Functional, linear in design and precise in any detail: it shouldn't be a surprise to know that Giustaforza II 2-16 DELUXE has been conceived and produced in Italy. The tool is hard-anodised with laser-etched inscriptions, and it's built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as an individualised masterpiece
Calibration service: . The +-4% tolerance is guaranteed for 5000 cycles (5000 'clicks'), then the wrench should be re-calibrated. Calibration is a service Effetto Mariposa offer in their laboratories (please contact Pushys Online or Effetto Mariposa direct for more details). A certificate of calibration is returned with each wrench serviced. Once the calibration is complete the tolerance of +-4% over nominal value will once again extend for the duration of 5000 cycles.
The DELUXE version is equipped with a bicycle-specific bit set: . Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 and T25) plus several other Torx and hex bits in standard length (25 mm). These should cover all of the newest Shimano, SRAM and Campagnolo high-end groupsets, plus a range of reversed-bolt stems . All bits are manufactured from S2 special steel with very high (62 Hrc) surface hardness to ensure maximum durability
Detail of bits: . 10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1) . 3x100mm (HEX4, HEX5, T25) . 1x100mm (extension
Related Products
