Knog Blinder Road 600/30lm Front/Mini Square Rear Bike Light Set Black

New And Improved Blinder Road 600 Light
When introduced in 2012, Blinder Road set the standard by which any serious road cyclist's lights were measured. Combining lightweight design, perfect beam angles, powerful light output and its unique mounting system. The Blinder was an instant classic. Now redesigned for 2020, Knog is proud to present the all-new Blinder Road 600. The Blinder Road 600 features all the best attributes of its original Blinder Road, but now with an incredible 600 lumens of light output. When this increase of illumination power is combined with the carefully considered beam angles for road riding, you have Knog's most powerfully perfect road bike light ever.

Advanced LED's And Optics
There is no such thing as a universal bike light. Depending on end-use and even bike type dictate the best bike light to use. Blinder Road utilises 2 LED's each independently capable of 400lm of output or 600lm when used together. The LHS optic has a 12-degree beam providing a spotlight that is perfect for racing and fast riding on smooth roads. Whilst the RHS Optic has a 32-degree beam proving a floodlight that is best suited for use on slower rides on bumpy or uneven riding conditions. Each LED has a variety of flash patterns and functions independent of the other.

Unique Fastening System
Utilising silicone to create the elastomeric strap combined with an over-moulded polycarbonate clip system allows Blinder Road to adapt to the many various configurations required of today's road cyclists, many of whom have GPS systems on their bikes. The Blinder Road is stylish and versatile enough to fit with a multitude of today's high-end bicycle cockpits. (Includes two removable silicone straps for bars 22-28mm & 29-35mm).

Waterproof And Integrated USB Charging
The Blinder road is 100% waterproof with a rating of IP67, which means you submerge your light in depths greater than 1 metre for over 30 minutes without damage (note if you are under 1 metre of water on your bike, the waterproofing of your light is probably the least of your worries). The light is charged via integrated USB, which means it does not require additional cables to charge from a USB Port, as well as having no need for single-use batteries.

Intuitive Functionality
When your Blinder is running low on battery, a red led will light up next to the button. This ring will turn green and then turn off once the Blinder is fully charged and ready to go. With a design that is wider rather than longer, it accommodates the 2 optics side by side keeping the centre of gravity as close to the handlebar as possible which avoids the potential for movement on bumpy roads.

Ergonomic Design
Finally, the Blinder Road's buttons and strap closures are all at the perfect ergonomic angle to present themselves, easily used, while wearing gloves.

Blinder Mini Square Rear Light
Big things come in small packages, and that is no different with the new Blinder Mini Square rear light. Using new COB technology, the Blinder Mini Square produces a punchy 30 lumens that will ensure you're seen and safe in all lighting conditions. The graphic flash pattern has 8 different modes and is also available as a front light to make a unique pair. The Blinder Mini Square rear light has integrated USB recharging, is 100% waterproof and has an impressive 30-hour run-time when using eco-flash mode.

Mutliple LED Functions
Blinder Mini's surface mounted LEDs output 50 lumens with a 20-degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash.

Simple and Smart Fastening System
Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 - 32mm+ diametre, and a large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Their tool-free mounting system makes attaching your light incredibly simple and silicone straps mean there'll be no chance of damaging your bike's frame.

Integrated USB Rechargeable
You don't need any cables to charge your Blinder Mini. Just un-clip, remove from the seat post and plug straight into any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.