Kogel PF30-386-EVO/CINCH 46 x 68mm Road Bottom Bracket

Kogel Hybrid bearings use premium grade Silicon Nitride (Si3n4) Bearings and premium hardened steel bearing races which are mirror polished to perfection. The result? A long lasting, smooth bearing which provides less resistance and is less prone to failures. These bearings are rated to the Grade 3 / ABEC 5 level - built to spin with minimal friction.

This bottom bracket will fit most 30mm crank spindles on a PF30 frame. It moves the bearings out of the frame in order to make a wider and stiffer set up. Bearing wear is greatly reduced with this wider set up compared to a standard PF30 setup with spacers. Fits Rotor 30mm, RaceFace Cinch, Easton, 386EVO, BB30. Campagnolo Over Torque. Cranks that will not fit with this bottom bracket: traditional (pre 2014) BB30 cranks with short spindles and Specialized FACT. For these cranks, please have a look at Kogel's PF30 bottom bracket

Choose road bearings for road bikes, cross bearings for mountain bikes and cyclocross.