Mudhugger have designed the EVO around the latest FOX 36 and 38's and Rockshox ZEB (adaptor required) and new Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from.
Bolts directly to the back of the fork brace. Default FOX kit supplied with rubber pads, bolts, washers and hex key to install to your FOX forks.
. More mud clearance.
. No more crown fouling at full compression.
. Stiffer.
. Subtle kicker to keep length as short as possible without compromising spray protection.
. 100% recycled PP.
. Optimum length, not too short, no longer than needed.
. Strong enough for DH racing at the highest level.
. Designed, made and packed in the UK.
. MINIMUM FORK OFFSET - 44MM
Length - 390mm total - Rear extension 255mm, front extension 105mm.
Weight - 100g, without fittings.
Note:
Compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast) and 36 (including Fox/Marzocchi) which have bolt holes.
Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold seperately).
Adapter bracket required for ZEB (Evo not compatible with 38mm offset ZEB).
Not compatible with Marzocchi Bomber Z2, or Downhill forks (i.e. older 650b, FOX 40's, Rocksox Boxxer).